The Future of Maximum CAD/CAM Automation for Ceramic Hybrids

Abstract

New concepts recently developed maximize CAD/CAM automation for all types of Ceramic Hybrids including Thick Film, Thin Film, LTCC and HTCC. Designs can now go quickly from concept to manufactured product, which will fuel more progress to bring a largely manual process to maximum automation, to include automatic masks, panels and generation of 3D analysis models. Maximum automation results in expanded use of technologies that are now shrinking. Technologies that have complex and difficult to understand design and manufacturing steps have a hard time gaining wide acceptance. CDS is tackling this complex challenge and is designing and implementing the following processes to solve the most difficult CAD/CAM problems:Be a true CAM tool that reads in designs from any other EDA (layout) system. YRun all possible DRC checks necessary for high fabrication and assembly yield. YMake all manufacturing masks automatically from very basic designs by using settings in an automatically configurable table. YPanelize all types of Ceramic designs in preparation for manufacturing. YGenerate documentation automatically through from stored configuration files. DIn LTCC and HTCC, place cavity punches (nibbles and rubs) automatically and feed correct machine data to the punch machine. YExport resistor trimming data directly to the laser trimming machine. FFeed flying probe test data directly to the flying probe tester. DAutomatically make a 3D Image and export ACIS or STEP for thermal analysis. DExport data directly to all electrical analysis and thermal analysis tools. PSupport circuit fabrication on non-planar surfaces. FMake full 3D analysis models of circuits on non-planar surfaces.F The purpose of this paper is to define what is required for the Ceramic Hybrid Microelectronics industry to realize full automation in design, checking and output to manufacturing. Your ideas are welcome.