Abstract
A new front-end electronics (FEE) system for RPC timing measurements has been developed for the ESTRELA project, which is part of the upgrade of the HADES experiment at GSI. The RPCs will cover an area of 8 m 2 with 2048 electronic channels. The chain consists on 2 boards: a 4-channel daughterboard (DB) and a 32-channel motherboard (MB). The DB uses a fast 2 GHz amplifier that feeds a discriminator with a constant threshold and an operational amplifier for a charge measurement by a Time-Over-Threshold (ToT) method for the integrated signal (for a slewing correction). The MB is connected to 8 DB, and provides voltage regulation, DACs for signal thresholds and a trigger logic. The MB delivers the differential output signals to an external HPTDC chip. Results are presented for (a) narrow electronic test pulses and for (b) RPC signals from gamma photons, showing a timing jitter around 15 ps/channel (for pulses above 100 fC) and 30-40 ps/channel, respectively. Tests with coincidently firing channels reveal levels of cross-talk below a 1% for a threshold of 25 fC, with a degradation of the time resolution of 10 ps at most.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
