The fracture propagation law of axially symmetric intersecting precut hydraulic fracturing in mine rock-breaking

Abstract

As a mine rock-breaking technique, hydraulic fracturing technology can reduce the amount of explosives used, which enhance safety and reduce environmental pollution in mines. After precutting along the borehole axis, hydraulic fractures will expand along the precutting direction within a certain range and reduce initiation pressure. These hydraulic fractures cut through the rock mass, reducing its integrity and weakening its mechanical properties. Hydraulic fracturing with axially symmetric intersecting precut fractures not only controls the multi-directional propagation of fractures but also increases the fractures within rock mass. The lattice method simulated the hydraulic fracturing process, focusing on the parameters like angles between precut fractures and the minimum horizontal principal stress, the maximum horizontal principal stress, and angles between intersecting precut fractures. Results indicate that the hydraulic fractures propagate along intersecting precut fractures, forming main and interconnected secondary fractures. The directional cutting effect is influenced by the number of secondary fractures. With the increase in the angle between precut fractures and the minimum horizontal principal stress, the maximum horizontal principal stress, the angle between precut fractures, the area of secondary fractures decreased, and the expansion extent of main fractures along the precut fractures increased, indicating better directional effects. The study identifies relationships between initiation time, initiation pressure, and parameters. These findings provide valuable technical guidance for designing on-site construction plans for hydraulic fracturing projects involving intersecting precut fractures.