The flame propagation characteristics and detonation parameters of ammonia/oxygen in a large-scale horizontal tube: As a carbon-free fuel and hydrogen-energy carrier

Abstract

As a carbon-free fuel and a hydrogen-energy carrier, ammonia is a potential candidate for future energy utilization. Therefore, in order to promote the application of ammonia in detonation engines and to evaluate the safety of ammonia related industrial process, DDT experiments for ammonia/oxygen mixtures with different ERs were carried out in a large-scale horizontal tube. Moreover, pressure transducers and self-developed temperature sensors were applied to record the overpressure and the instantaneous flame temperature during DDT process. The results show that the DDT process in ammonia/oxygen mixtures contains four stages: Slow propagation stage, Flame and pressure wave acceleration stage, Fast propagation and detonation wave formation stage, Detonation wave self-sustained propagation stage. For stoichiometric ammonia/oxygen mixtures, flame front and the leading shock wave propagate one after another with different velocity, until they closely coupled and propagated together with one steady velocity. At the same time, it is found that an interesting retonation wave propagates backward. The peak overpressure, detonation velocity, and flame temperature of the self-sustained detonation are 2 MPa, 2000 m/s and 3500 K, respectively. With the ER increased from 0.6 to 1.6, the detonation velocities and peak overpressures ranged from 2310 m/s to 2480 m/s and 25.6 bar–28.7 bar, respectively. In addition, the detonation parameters of ammonia were compared with those of methane and hydrogen to evaluate the detonation performance and destructiveness of ammonia.