Abstract
This work is devoted to the experimental study of strain distribution at crack tip using digital image correlation technique. The real strain fields were compared with an elastic solution for verification of a hypothesis about link of the elastic-plastic and elastic strain fields at crack tip using the coupling between Young’s modulus and the secant plasticity modulus. The precracked plane specimens of titanium alloy VT1-0 with a thick of 1 mm were used in experimental program. The method of digital image correlation based on system StrainMaster was used for measurement the plastic deformation with spatial resolution up to 1 mkm. The strain field was obtained for different crack length and different biaxial coefficient was obtained using biaxial testing machine Biss BI-00-502. Numerical simulation of deformation fields at the fatigue crack tip was done. A qualitative correspondence between the theoretical, calculation and experimental results has been shown.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
