Abstract
The variable mass flow in perforated horizontal wells is very complex. One reason is that the perforation can increase the roughness of the pipe wall which will increase the frictional pressure drop. The other is the fluid boundary layer and velocity profile of axial flow will be changed due to the “mixing” of the inflow with the axial flow. The influences of the perforation parameters and flux rate on the pressure drawdown in horizontal wellbore are investigated. The perforation parameters include perforation phasing, perforation diameter, and perforation density. According to the experiment results, some modes such as friction factor calculation model (the accuracy of the model is 4%), “mixing” pressure drop calculation model (the accuracy of the model is 3%), and total pressure drop calculation model (the accuracy of the model is 2%) are developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.