The Elastic Strain Energy of Damaged Solids with Applications to Non-Linear Deformation of Crystalline Rocks

Abstract

Laboratory and field data indicate that rocks subjected to sufficiently high loads clearly deviate from linear behavior. Non-linear stress–strain relations can be approximated by including third and higher-order terms of the strain tensor in the elastic energy expression (e.g., the Murnaghan model). Such classical non-linear models are successful for calculating deformation of soft materials, for example graphite, but cannot explain with the same elastic moduli small and large non-linear deformation of stiff rocks, such as granite. The values of the third (higher-order) Murnaghan moduli estimated from acoustic experiments are one to two orders of magnitude above the values estimated from stress–strain relations in quasi-static rock-mechanics experiments. The Murnaghan model also fails to reproduce an abrupt change in the elastic moduli upon stress reversal from compression to tension, observed in laboratory experiments with rocks, concrete, and composite brittle material samples, and it predicts macroscopic failure at stress levels lower than observations associated with granite. An alternative energy function based on second-order dependency on the strain tensor, as in the Hookean framework, but with an additional non-analytical term, can account for the abrupt change in the effective elastic moduli upon stress reversal, and extended pre-yielding deformation regime with one set of elastic moduli. We show that the non-analytical second-order model is a generalization of other non-classical non-linear models, for example “bi-linear”, “clapping non-linearity”, and “unilateral damage” models. These models were designed to explain the abrupt changes of elastic moduli and non-linearity of stiff rocks under small strains. The present model produces dilation under shear loading and other non-linear deformation features of the stiff rocks mentioned above, and extends the results to account for gradual closure of an arbitrary distribution of initial cracks. The results provide a quantitative framework that can be used to model simultaneously, with a small number of coefficients, multiple observed aspects of non-linear deformation of stiff rocks. These include, in addition to the features mentioned above, stress-induced anisotropy and non-linear effects in resonance experiments with damaged materials.