Abstract
Acoustic microscopy (30–60 μm resolution) and nanoindentation (1–5 μm resolution) are techniques that can be used to evaluate the elastic properties of human bone at a microstructural level. The goals of the current study were (1) to measure and compare the Young’s moduli of trabecular and cortical bone tissues from a common human donor, and (2) to compare the Young’s moduli of bone tissue measured using acoustic microscopy to those measured using nanoindentation. The Young’s modulus of cortical bone in the longitudinal direction was about 40% greater than ( p<0.01) the Young’s modulus in the transverse direction. The Young’s modulus of trabecular bone tissue was slightly higher than the transverse Young’s modulus of cortical bone, but substantially lower than the longitudinal Young’s modulus of cortical bone. These findings were consistent for both measurement methods and suggest that elasticity of trabecular tissue is within the range of that of cortical bone tissue. The calculation of Young’s modulus using nanoindentation assumes that the material is elastically isotropic. The current results, i.e., the average anisotropy ratio ( E L /E T ) for cortical bone determined by nanoindentation was similar to that determined by the acoustic microscope, suggest that this assumption does not limit nanoindentation as a technique for measurement of Young’s modulus in anisotropic bone.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.