The effects of vent channels and metal conductive base on thermal characteristics of the active graphite-composite cylindrical heat sink

Abstract

This study proposed a novel configuration of active LED graphite-composite heat sink and experimentally investigated the effects of vent channels and metal conductive base on the fluid flow and heat transfer characteristics of this active heat sink. The heat sink was made of the graphite powders, aluminum-alloy powders, and adhesive mixed in specific proportion by the vacuum-pressure injection technique. The cost and weight of this graphite-composite material are much lower than those of aluminum alloy. The configuration of heat sink is a hollow circular cylinder with multiple radial fins. Different motor fans can be put in the chamber of heat sink, with various vent-channel positions and orientations (vertical vent channels, horizontal upper-row vent channels, and horizontal bottom-row vent channels) and numbers of channels (24, 36, 48, and 72) in the heat sink to enhance overall cooling performance by driving through airflow. The results indicate that the overall Nusselt number (Nu) of the graphite-composite heat sink with motor fan was 2.23–2.50 times that without motor fan. The numbers of vent channels in heat sink were positively related to the total flow rate of through air. Thus, the heat sink with the most vent channels had the maximum Nu in the motor-fan mode. When an additional annular aluminum-alloy conductive base was mounted in the graphite-composite heat sink with the most vent-channel configuration, the Nu was 35% higher than that without conductive base in motor-fan mode, proving the metal conductive base was effective. The optimal vent-channel configuration in this study was also used for the full aluminum-alloy heat sink, the corresponding Nu of the models without/with motor fan were compared with the full aluminum-alloy heat sink without vent channel, the heat transfer enhancements were about 13% and 127%, respectively.