The effects of removing bed materials on flow velocity (case study: Zaremrood River, Iran)

Abstract

Nowadays, in parts of Iran, rivers and flood plains are being used as sand and silt mines, and the removal of river bed materials is performed without studying its effects on hydraulic behavior. On the other hand, the flood plain lands are in danger of floods and bank erosion. Zaremrood River in Tajan watershed due to removal of river bed material, two planes of before and after removal with scale of 1:1,000, has been used as basic data. The field investigation was emphasized on the end part of Zaremrood with a length of 5 km and starts from Ghandikola village to Ahoodasht Bridge. Using total station and field observations, the characteristics of reaches and cross sections of right bank, left bank, and main bed of river are written separately. Using software of HEC-RAS, ArcView 3.2, and extension HEC-GeoRAS, the flood zoning with different return periods to investigate water velocity and its changes, geometrical simulation of the bed, sides and flood way of rivers, and then by entering the results of HEC-GeoRAS into hydraulic software HEC-RAS for two before and after planes have been performed, and flow velocity was analyzed for three return periods of 10, 50, and 100 years. The results of this research showed that the velocities due to removal for floods with different return periods have increased, whereas water height and level during removal period have decreased.