Abstract
In the assembly processes of mechanical parts from semifinished parts and finished parts there are different levels of roughness and different types of defects. This is mainly affecting the final surface of the finished parts. The founded defects can be from different categories like: irregular shape and surface, deformed edge, processing defects, little particles that combined with high pressures can make the parts crack. In the end this affects the sealing and the tightness of the assembled goods. After assembly it can also influence the performance of the resistance, the cycle life of the parts, the dullness and also the precision of final power packs. In this paper it is going to be established what are the parameters and the conditions for a stable sealing process that could survive to different environmental pressures. This results are presented after observation of various mechanical assemblies and their guidelines in which were determined the circumstance for a proper sealing. The main functions of the adhesion are the fixation and the sealing with a mechanical connection. In order to perform on maximum capacity this connection must be stable and strong and capable to hold to every impediment and test submitted. The following application used for gluing and sealing of electronic and mechanical components can be put it on single parts or in assembled parts and also for complex circuits, having a various applicability and utility in automotive industry.
Highlights
In the variety of assembly of different mechanical parts, all the way from the semi-finished parts to the final products, in which additional is including all the procedures, like machining, casting, forging, welding, they are distinctive levels of requirements of roughness and defects on the parts surfaces. [1] The defects of the part’s surface can vary, from uneven covering, deformed edge even to casted products having defects of casting filling, chips, and very small cracks
One of the reason that is often met is that comes into view a surface that is not proper for a sealing due to tight collaboration between the material’s microstructure, deformation during processing and physico-chemical reaction that happens in that time
The phrase of sealing is referring for assembly of two or more compounds mechanical stable for different electronics components. This two processes are made by singular stations or fully automated which are integrated in the assembly system. (Figure1.)
Summary
In the variety of assembly of different mechanical parts, all the way from the semi-finished parts to the final products, in which additional is including all the procedures, like machining, casting, forging, welding, they are distinctive levels of requirements of roughness and defects on the parts surfaces. [1] The defects of the part’s surface can vary, from uneven covering, deformed edge even to casted products having defects of casting filling, chips, and very small cracks. [1] The defects of the part’s surface can vary, from uneven covering, deformed edge even to casted products having defects of casting filling, chips, and very small cracks The effect of this would be that on high tension submission, cracks can appear and destroy the final product. The quick development and fast industrialization of scientific technology, in a day’s production it is been introduced for different machine on high scale, speedy and with high precision It is taken into account the flexibility, the integration on the final product, the autonomy, the intelligence and one of the main focus currently, on ecology. The gluing application is made in general through independent equipment or a system of automatic dosage, which are introduced in the final assembly’s line, only after the finishing surface is previously prepared
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
