Abstract
Abstract Procedures presently used to prepare surfaces of aluminum adherends for bonding with structural adhesives entail the use of corrosive solutions that are environmentally hazardous. As an alternative, we investigated whether eximer laser radiation can effectively be used to prepare the surfaces of aluminum adherends. The results indicate such a methodology to be very promising. Using a KrF laser, at a radiant intensity of 1.67 × 1013 W/m2/pulse, successive mm2 regions of aluminum coupons were irradiated for fixed numbers of pulses/region. This resulted in changes to the topographies and oxidation states of the surfaces. Symmetric lap shear joints from coupons so treated had considerably increased strains at fracture and 24% greater joint strengths as compared with controls. The results further indicate that fracture toughness can be increased above that of presently used procedures. The topographies of the treated and control surfaces were characterized using a new topographic characterizing system. An elastic model is presented that relates failure characteristics to experimentally-determined topographic parameters. The results suggest that different mechanisms for joint enhancement are operative.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.