Abstract
FeSi2 modified C/C-SiC composites (C/C-SiC-FeSi2) are fabricated by chemical vapor infiltration (CVI) combined with reactive melt infiltration (RMI) with FeSi75 alloy. The effects of high-temperature annealing (1600 °C, 1650 °C, 1700 °C) on the microstructure and performance of C/C-SiC-FeSi2 are investigated. With the elevation of annealing temperature, the porosity of the composites and the content of SiC increase due to the evaporation of liquid Si and the further reaction of Si and C. The mechanical performance gradually decreases due to the catalytic graphitization of the carbon fiber, the high porosity and the thermal residual stress (TRS) caused by thermal mismatch of different phases. The coefficient of thermal expansion and thermal diffusivity slightly decrease with increasing annealing temperature for the increase of porosity. However, the friction performance of the heat treated materials at high braking speed are greatly improved attributing to the increase of SiC content and the capturing and storage function of pores on hard particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.