Abstract
High purity, aligned multi-wall carbon nanotube (CNT) films were grown on quartz substrates in a chemical vapor deposition (CVD) process. In the CVD process, a solution of ferrocene in toluene was injected in a carrier gas of Ar/H 2, into a horizontal quartz tube. The CNTs were analyzed by scanning and transmission electron microscopy, thermogravimetric analysis, and Raman spectroscopy. Results for CNTs synthesized using a wide range of toluene concentrations indicated that, for carbon concentration in the gas phase higher than ∼9.6 mol/m 3, catalyst deactivation due to encapsulation of metal particles occurs. Sectional analysis of the CVD reactor products showed that more than 40% of the iron particles were deposited in the first 10 cm section of the reactor, wherein diameters of nanotubes (∼28 nm) and iron particles are smaller than that of (∼48 nm) in the exit region of the reactor. The CNT diameter is closely related to the iron particle size on which they grow. In the area close to the reactor inlet, as the nanotube film grows the iron particles become trapped and attached to the dense film of nanotubes and turn into carbon-coated nanospheres on top of the nanotube array.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.