Abstract
Reinforcement of Portland cement-based binders with natural wollastonite microfibres has been further investigated with emphasis on the effect of fibre geometry on property modification. Wollastonite micro-fibres were separated into five different size groups before addition to cement and cement-silica fume matrices. The aspect ratio (length/width) of the wollastorite micro-fibres was determined by scanning electron microscopy technique. Systematic experimentation including flexural tests, mercury intrusion porosimetry, helium gas pycnometry, and isopropyl alcohol saturation measurement showed that, at constant micro-fibre content, the flexural strength and total porosity of the composites remained essentially unchanged and independent of the aspect ratio of the wollastonite micro-fibres. However, the volume of coarse pores, the pore size distribution, the flexural toughness and overall ductility characteristics of the hydrated cement and cement-silica fume matrices were observed to change systematically as the aspect ratio of wollastonite micro-fibres was increased. A discussion of the differences in the observed properties is presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.