Abstract

Visualization of the microstructure of the food matrix of both raw materials and the final product is one of the keys to understanding the processes occurring during its formation. It is the fixation of the results at the microlevel that allows us to form a hypothesis and then confirm it with the obtained array of experimental data. The presented study is aimed at studying the effect of ultrasonic water treatment on the change in the microstructure of wheat grain during its humidification. The article also presents the results of studying the microstructure of dough and wheat flour bread obtained using water after ultrasonic water treatment and the intensity of the processes of staling of finished bread in storage. The object of the study was grain of soft spring white wheat (Triticum aestivum L.), varieties of Lubava, harvest 2014-2018, Russia (the protein content was 12.5 ± 0.3 g/100 g in terms of humidity); dough and bread made from wheat flour (ash content 0.55%, mass fraction of gluten 28.5%), produced using the technology of plain bread, a classic recipe without improvers. Ultrasound-treated water with an exposure frequency of 22 ± 1.65 kHz and with a power variation of 252-630 W/l was used in test technology. The experimental data obtained made it possible to establish the intensification of the processes of swelling of wheat grain during soaking. In the experimental samples, after 8 hours of soaking, the loosened structure of the endosperm and evenly swollen components of the grain were observed, and the loop of the groove was closed. Activation of the processes of dough science was established, and gluten flour in the dough formed a single monolithic frame, in which the swollen starch grains are tightly packed. The interstitial walls of the crumb of the prototypes consisted of a solid mass of protein coagulated during baking, inside of which swollen gelatinized starch grains are interspersed, they are closely adjacent to the mass of coagulated protein with their entire surface, and therefore, there is no sharp, clearly visible boundary between them. The most pronounced changes in the structure of the dough and bread crumb were noted when using water, after ultrasonic water treatment at a power of 504 and 630 W/l. This method of exposure can be recommended as the best for obtaining good quality bread with less pronounced staling during storage.

Highlights

  • Numerous studies in recent years, in the field of ultrasonic exposure in the frequency range from 20 to 100 kHz, in the production of food products, prove its high effectiveness on the processes of formation of the food matrix

  • The study of microstructural changes in control and experimental samples of wheat grain (Sample 1) was carried out after 8 hours of the soaking process, which is due to the achievement of the nominal value of the swelling rate indicator

  • Ultrasonic exposure (25 kHz) used in this study can be one of the effective environmental factors that stimulate the process of soaking wheat grains, forming dough and bread and wheat flour

Read more

Summary

Introduction

Numerous studies in recent years, in the field of ultrasonic exposure in the frequency range from 20 to 100 kHz, in the production of food products, prove its high effectiveness on the processes of formation of the food matrix. The grea dough effect of ultrasonic exposure is observed in changing the microstructure of the matrix of food raw materials and the finished product. This result can manifest itself when processing the entire matrix of the food system and when acting on its individual components, for example, on water. Using ultrasonic exposure as a technological operation at the stage of water treatment, it is possible to obtain significant results characterizing an increase in the permeability of the membranes of the shell cells of wheat grain, the development of a protein matrix, and the swelling of starch grains of wheat dough [9, 10]. We supposed that the ultrasonic exposure is one of the environmentally friendly technologies [11]

Objectives
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.