Abstract
This study aimed to evaluate whether dual-energy computed tomography can reduce metal artifacts and improve detection of pulmonary nodules. Twelve simulated nodules were randomly placed inside a chest phantom with a pacemaker. Then, dual-energy computed tomography was performed, and 5 virtual monochromatic images at 40, 50, 65, 100, and 140 keV were reconstructed with 5- and 0.625-mm slice thicknesses. Two independent observers assessed the metal artifact (3-point scale from 1, none, to 3, severe) and detection of the nodule (5-point scale from 1, definitely absent, to 5, definitely present). Statistical analysis was performed with a P value of less than 0.01 (0.05/5). With both slice thicknesses, the metallic artifact increased at 40 or 50 keV and decreased at 100 or 140 keV relative to that at 65 keV (P < 0.01). The nodule detection score was not significantly different between each kiloelectron volt level with the 0.625-mm slice thickness; however, the score was significantly worse at 40 keV compared to 65 keV (P < 0.01) with the 5-mm slice thickness. High monochromatic energy images can reduce metal artifacts without a change in nodule detection score. Low monochromatic energy images increase metal artifacts and worsen nodule detection in thick slices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.