Abstract

A systematic study of the variation in resistivity and lifetime on cell performance, before and after light-induced degradation (LID), was performed along the B- and Ga-doped Czochralski (Cz) ingots. Screen-printed solar cells with Al-back surface field were fabricated and analyzed from different locations on the ingots. Despite the large variation in resistivity (0.57 /spl Omega/-cm to 2.5 /spl Omega/-cm) and lifetime (100-1000 /spl mu/s) in the Ga-doped Cz ingot, the efficiency variation was found to be /spl ges/0.5%. No LID was observed in the cells fabricated from the Ga-doped ingot. In contrast with the Ga-doped ingot, the B-doped ingot showed a very tight resistivity range (0.87 /spl Omega/-cm to 1.22 /spl Omega/-cm), resulting in very tight lifetime and efficiency distributions. However, the LID effect reduced the efficiency of these B-doped cells by about 1.1% absolute. Additionally, the use of thinner substrate and higher resistivity B-doped Cz is shown to effectively reduce the LID effect.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.