Abstract
This research was conducted with the aim of knowing the Effect of using silica sand before and after physical activation on the acceleration of a 4-stroke gasoline motorcycle engine. This research was conducted by testing the acceleration 0 – 80 km/hour and 40 – 80 km/hour with variations in the composition of tapioca in the pellet mixture (1%, 2%, and 3%) and variations in temperature activation (150?C, 200?). C, and 250?C). The silica sand pellets used in this study were 10 mm in diameter with a thickness of 3 mm, which had been activated for 60 minutes. The results showed that the use of silica sand had an effect on the acceleration of a 4-stroke gasoline motorcycle. The best composition of silica sand pellets occurs in the amount of tapioca 3% and with an activation temperature of 250?C, which can increase the acceleration by 12.45% at an acceleration of 0 – 80 km/hour.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.