Abstract
Recycled high density polyethylene/sugarcane bagasse fiber composites were prepared by melt mixing using a two-roll mill and compression molding. The effects of the sugarcane bagasse fibers content and the addition of compatibilizing agent maleated polyethylene on the composite properties were studied. The scanning electron micrographs of the compatibilized composites showed clear evidence of good interfacial adhesion between the fiber surface and the polymer matrix. The tensile tests revealed that the compatibilized composites provide better tensile strength and modules than the uncompatibilized composites. The elongation at break and the impact strength for all the composites decreased significantly compared to the recycled high density polyethylene. The composites had the same melting temperature and were thermally less stable than that of the recycled high density polyethylene. The presence of maleated polyethylene was found to decrease the water absorption and slightly increase the specific gravity of the composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.