Abstract
Laminated concrete slabs can deliver desirable structural properties and effectively improve the speed of construction. According to their basic specifications, laminated concrete slabs comprise a 60 mm precast concrete slab and a 70 mm concrete layer cast in situ, with a steel truss bar at a height of 80 mm. This paper studies the effects of the steel truss bar on the mechanical properties of precast slabs. A simple but accurate method is proposed for calculating the stiffness of precast slabs. The test results show that the steel truss bar has a limited effect on the stiffness of the precast slab but will weaken the compression strength of the concrete, resulting in a significant reduction in the ultimate bearing capacity of the precast slab. Further discussions show that eliminating the steel truss bar and appropriately increasing the thickness of the precast slab can effectively increase the stiffness and load-bearing capacity of the precast slab, as well as reduce the consumption of the floor reinforcement by about 26%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
