The effect of sizing on composite properties for materials used in the shuttle filament wound case

Abstract

AbstractAn epoxy resin and a sized carbon fiber have been used to produce a light‐weight filament wound case for the Space Shuttle. The sizing facilitates fiber handling during winding but may affect the amount of resin absorbed by the fiber during impregnation and the final mechanical properties of the composite. Naval Ordnance Lab rings were wound to study the effect of the sizing content on the resin absorption by the fiber bundles, the final tensile properties of the composite, and the type of failure observed at burst. The resin content of the rings studied was between 20 to 40 percent, and the sizing content, 0 to 1.6 percent by weight. Results showed that the sizing content was a critical parameter which determined the amount of resin absorbed by the fibers. The final tensile strength was dependent on the amount of sizing present. The tensile strength decreased by as much, as 60 percent when a low resin and high sizing content were present. The type of failure at burst was a function of resin content rather than size content.