Abstract

Stain resistance is one of the important characteristics of exterior wall latex coatings in cities. Adding silica sol to the coating can increase its stain resistance. However, there is currently limited research on the long-term natural exposure test of latex coatings. This paper first investigates the influence of different amounts of silica sol on the elongation, water absorption, and stain resistance of coatings and obtains a better percentage of silica sol addition. Then, heat storage tests were conducted to obtain the viscosity and pH changes of the coating. Afterwards, outdoor natural exposure tests were conducted for up to 12 months to obtain the stain resistance of the coating with the addition of silica sol. The results indicate that the stain resistance value of the coating with added silica sol was significantly better than that without added silica sol after 12 months of natural exposure to sunlight, increasing by 65.8%. The formation of a network structure of Si O-Si bonds in the silica sol enhances the hardness and rigidity of the coating while also allowing it to enter the capillary tubes of the coating caused by prolonged exposure to sunlight, avoiding cracking of the coating and preventing the entry of dust and impurities. Therefore, the stain resistance of the coating is improved. These research results will contribute to the better application of exterior wall latex coatings in architecture.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.