Abstract
AbstractUseful silicone pressure-sensitive adhesives (PSAs) have been prepared from a high solid silicone resin. Platinum catalysts and crosslinking compounds were used to obtain new self-adhesive tapes. The influence of catalysts and crosslinking compounds on the basic properties of self-adhesive tapes was tested, taking into account the compatibility of silicone composition. The obtained systems showed good self-adhesive properties, and high thermal resistance over 225 °C. The low viscosity of the compositions obtained relatively increases the application potential of self-adhesive tapes based on it. Moreover, the prepared compositions show the potential for further modifications, especially physical ones e.g. silicon powder. The obtained new tapes showed good self-adhesive properties and kept high thermal resistance over 225 °C. It is well known that silicone pressure-sensitive adhesives are a group of silicone adhesives for special applications. Due to their unique resistance to environmental conditions, temperature and chemical resistance, they are difficult to modify.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
