Abstract

The effect of deformation temperature and strain rate on the dynamic recrystallisation (DRX) behaviour of X70 pipeline steel was investigated. DRX parameters such as the critical and peak stresses and strains as well as the deformation activation energy were determined in the temperature range between 925°C and 1125°C for strain rates of 0.1, 1 and 5s−1. The relationship between the peak stresses and strains with the Zener–Hollomon parameter was determined. The dynamically recrystallised volume fraction was computed as a function of the different temperatures and strain rates. The APRGE software was applied for the first time on electron back-scattering diffraction data of dynamically recrystallised microstructures in order to reconstruct the prior austenite from the as-quenched martensite phase. The dynamically recrystallised flow stress curves and microstructure were also predicted using cellular automata modelling. The results show an earlier onset of DRX with a decrease in strain rate or an increase in deformation temperature. The dynamically recrystallised grain size is also found to decrease with an increase in strain rate and a lowering of deformation temperature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.