Abstract
BackgroundStalk lodging (breaking of plant stems prior to harvest) is a major impediment to increasing agricultural yields of grain crops. Rind puncture resistance is commonly used to predict the lodging resistance of several crop species. However, there exist no standard operating procedures or suggested protocols for conducting rind penetration experiments. In addition, experimental details of rind penetration tests such as the shape and size of the penetrating probe are rarely reported in the literature. This has prevented meta-analysis of results and has likewise prevented key findings of past studies from being replicated. As a first step towards establishing an agreed upon measurement standard for rind puncture resistance this study investigates the effect of the puncturing probe’s geometry on test results.ResultsResults demonstrate that probe geometry has a significant impact on test results. In particular, results showed that a 2 mm diameter chamfered probe produced stronger correlations with stalk bending strength than a 1.5 mm diameter pointed probe. The chamfered probe was also more strongly correlated with geometric features of the stalk that are known to influence stalk lodging resistance (e.g., rind thickness, diameter and section modulus). In addition, several alternative rind penetration metrics were investigated, and some were found to be superior to the most common rind penetration metric of maximum load.ConclusionsThere is a need in the agricultural and plant science community to create agreed-upon operating procedures and testing standards related to mechanical traits of plant stems. In particular, a standardized probe geometry and insertion rate for rind penetration studies are needed to enable greater interoperability and meta-analysis of results. Probe shape and size should be reported in any study conducting rind penetration tests as these factors significantly impact test results.
Highlights
Stalk lodging is a major impediment to increasing agricultural yields of grain crops
Rind puncture tests consisted of 4 rind penetration metrics (Fig. 3), each of which were obtained at multiple locations along the stalk (Table 1)
Results demonstrate that probe geometry has a statistically significant influence on the correlation between rind penetration tests and stalk bending strength
Summary
Stalk lodging (breaking of plant stems prior to harvest) is a major impediment to increasing agricultural yields of grain crops. The rind penetration methodology involves forcing a small probe through a plant stalk or stem and measuring the maximum force required to penetrate the rind This method has been used throughout most of the 20th century to investigate stalk strength and dates back to at least 1935 [13]. The methodology varies from study to study making it difficult or impossible to directly compare results between studies While it is generally understood in the broader literature that penetration measurements are dependent upon the shape and size of the impending probe there is no information or discussion of rind penetration probe shape and size in the maize literature. The absence of documented operating procedures and testing standards for rind penetration measurements and the related inability of current researchers to reproduce key findings of past studies is likely why the methodology has not been widely employed by breeding programs
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.