Abstract
The waste textile industry is one of the problems to the human life as well as environment. In this study, the treatment of the waste textile industry by the electrochemical method using stainless steel as anode and cathode was investigated. The effect of potential to color and COD removal were investigated. The research consists of several stages, the electrode composition analysis using Scanning Electron Microscopy-Energy Dispersive X-Ray (SEM-EDX). The electrolysis waste textile industry has been done using various potential. Degradation parameter is Chemical Oxygen Demand (COD) were analysis using spectrometry method. The research results show that stainless steel electrode has composition are iron (72.2 %), chromium (18.9 %), nickel (7.6 %) and silica (1.4 %). After electrolysis at potential constant (3 V) shows percentage degradation of the waste textile industry is 98.56 %. The percentage reduction in COD value of textile waste electrolyzed in optimum condition is 50.38 %. As conclusions are the potential at 3 V and stainless-steel electrode as a good parameter and material for electrochemical degradation of the waste textile industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
