The effect of pore size distribution on the frequency dispersion of porous electrodes

Abstract

The transmission line model with pore size distribution (TLM-PSD) developed for blocking electrodes without faradaic reactions in our previous work was reformulated on the basis of the distribution of the penetrability coefficient α 0, which is a more generalized concept than the distribution of pore size. Impedances were simulated using the TLM-PSD model for four different pore size distributions (PSD). Although different shapes of the Nyquist curve was obtained depending upon the different PSD, all simulated impedances share a common point that an increase in the width of a distribution ( P σ ) leads to a more inclined Nyquist curve at high penetrability ( α μ ). This is because the effect of small pores on the total impedance increases with P σ . We fitted the experimental impedance data of a carbon membrane with the TLM-PSDs and the de Levie’s model (TLM-δ). The fitting by TLM-PSD was successful while TLM-δ could not describe the impedance of the porous electrode at low frequency range. In addition, the geometric parameters estimated by TLM-PSD agreed with physically available values.