Abstract
The possibility of increasing the durability of steel pins working against bronze bushings through plasma–electrolytic nitrocarburizing of the surface of medium carbon steel is shown. The phase composition, microhardness, morphology, and surface roughness were studied. Tribological tests were carried out under dry friction conditions according to the shaft-pad scheme. It has been established that plasma–electrolytic nitrocarburizing of the surface of medium carbon steel at a temperature of 700 °C for 5 min leads to a decrease in the friction coefficient by 2.3 times, the weight wear of steel by 24.9 times, and the wear of the bronze counterbody by 5.9 times. At the same time, the contact stiffness increases by 2.6 times. Type of wear: wear with dry friction and plastic contact. The changes in tribological characteristics are associated with the high hardness of the hardened steel surface combined with the effect of dispersed nitrides and iron carbonitrides.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
