The effect of pipeline layout parameters on mode and dynamic stress of “airframe-clamps-pipeline” structure

Abstract

PurposeIn the coupling of aircraft pipeline structures, current research works mainly focus on fluid-solid coupling effects or a single part of structure vibration like a pipeline. Because of the clamp, the pipe vibration caused by fluid pulsation was transmitted to the body, and the body vibration was also transmitted to the pipe structure. Thus, the relationship between the airframe and the pipeline system cannot be separated, and the influence of airframe needs to be considered when coupling structure under vibration. The paper aims to discuss these issues.Design/methodology/approachThis paper aims to investigate the influence of pipeline layouts on airframe-clamps-pipeline (ACP) structure’s dynamic response by experiment and simulation method. First, ACP structures are established including three parts. The natural frequencies and mode shapes are obtained by hammering experiment. The mode results are in agreement with numerical simulation. By using electromagnetic vibration shaker, extinction is applied on ACP structure, and then the dynamic responses of structure can be obtained by test equipments. The influence principle of pipeline layouts is obtained by dynamic response analysis. The present study provides a method for pipeline layout design in aerospace engineering.FindingsUnder the ACP’s first-order resonance frequency excitation, the maximum stress increases when the Z-shaped pipeline bending position changes from 1/2 to 1/5. The opposite way occurs under the only pipeline resonance frequency excitation. The stress amplitudes near both sides (inner and outer) of the clamp on the plate surface change with the excitation frequency. Under the ACP’s first-order resonance frequency excitation, the outer side stress is larger than the inner side stress, but under the only pipeline resonance frequency excitation, the inner side stress is larger than the outer side stress.Originality/valueThe study of the effect of pipeline layout parameters on ACP structure provides a method for pipeline layout design in aerospace engineering.