Abstract
The objective of this work was to experimentally study the effect of different operating conditions on sorbent (limestone) to capture metals and the formation of hexavalent chromium during fluidized bed incineration of wastes containing Pb, Cd, Cu, and Cr. The operating parameters evaluated included: 1) addition of organic chloride (PVC); 2) addition of inorganic chloride (NaCl); 3) addition of sulfide (Na 2S); 4) size of sorbent; and, 5) air factor. The experiments were carried out in a pilot scale fluidized bed incinerator with air pollution control devices of two consecutive cyclones and a wet scrubber. Experimental results indicated that limestone could effectively capture most heavy metals Pb, Cr, and Cd in the sand bed. The addition of organic chloride (PVC) and inorganic chloride (NaCl) in feedstock caused different consequences. The former decreased the adsorption efficiency, while the latter increased the adsorption efficiency of limestone in the sand bed. Moreover, the presence of sulfide (Na 2S) was helpful in controlling metals during incineration. Little hexavalent chromium is formed during incineration, but the presence of organic chloride PVC produced more Cr(VI) than inorganic chloride NaCl.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.