Abstract
Wire and arc additive manufacturing (WAAM) provides a convenient solution for the integrated design and manufacturing of Al/steel structures. The multiple thermal cycles inherent in WAAM can affect the Al/steel interface and ultimately the overall performance of the Al/steel structure. Herein, the evolution behavior of the Al/steel interface microstructure under different WAAM modes, number of thermal cycles, and interpass temperature is investigated. The results show that the process of heat accumulation plays an important role in the evolution of Al/steel interface. As the number of thermal cycles increases, the intermetallic compounds layer gradually transforms from the mainly τ5‐Al8Fe2Si phase to (Al, Si)13(Fe, Cr)4 phase. The rise of interpass temperature significantly aggravates the microstructural evolution process, but the final interface structure can be manipulated employing temperature control. When the interpass temperature is lower than 250 °C, the formation of the brittle Fe2Al5 phase is avoided. With the increase of thermal cycles, the shear strength of Al/steel additive specimens increases first, then decreases, and finally tends to be stable. The changes in shear strength are closely related to the interface microstructures.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
