Abstract
In the present work, the type, morphology and size of secondary phase particles in a Mg–4Al–2Sn-0.5Ca (ATX420) alloy are tailored through sub-rapid solidification (SRS) and aging treatment before friction stir processing (FSP) to systematically investigate their impact on microstructures and mechanical properties of the FSP ATX420 Mg alloy. The smaller eutectic CaMgSn phase with micro-defects in the as-cast SRS alloy is more likely to be broken during FSP, compared to the as-cast conventional solidification (CS) alloy. Additionally, nano-sized CaMgSn and Mg17Al12 particles precipitate in as-aged SRS alloy due to a high supersaturation solubility of solutes in the as-cast SRS alloy. These densely-distributed nano-sized precipitates in the as-aged SRS alloy increase the processing temperature by 60 °C during FSP, which results in less nano-sized precipitates in the stirring zone and grain growth of the α-Mg matrix. This leads to a decrease in hardness in the FSP-aged-SRS alloy (∼10 HV). Besides, the grain structure evolutions in the stirring zone and transition zone are systematically investigated for understanding the microstructure evolution during FSP in Mg alloys with eutectic phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
