Abstract
The low-dimensional model derived for the wall region of a turbulent boundary layer (Aubry et al., 1988) is applied to a drag-reduced flow. In agreement with some experimental results, drag reduction is modeled by thickening the wall region, which is achieved by applying stretching transformations to the original flow. By application of a Galerkin projection, a set of ordinary differential equations (ODEs) is obtained whose structure is identical to the set corresponding to the unmodified flow. The coefficients of the ODEs are modified in a nontrivial way. The bifurcation diagrams plotted for different values of the stretching parameter are different in detail but the structure is globally the same. In particular, the intermittent behavior which Aubry et al. identified with the cyclic bursting events experimentally observed is still present. The scenario by which intermittency appears through a subcritical Hopf bifurcation in which a heteroclinic cycle is created and disappears through a bifurcation to traveling waves is identical. These results hold for values of the stretching between 1 and 2.65, the value at which the top of the buffer layer reaches the centerline of the pipe. This is in agreement with experimental results for flows whose drag is reduced but which still display intermittency. The bifurcations occur in the stretched flow at increased levels of dissipation (relative to the unstretched flow), consistent with theoretical pictures of drag reduction, in which the increase of scale is due to stabilization by an increase of dissipation in the turbulent part of the flow. Moreover, this method is a systematic way to perturb the coefficients of the ODEs of Aubry et al. (1988). Under this kind of perturbation, the behavior of the solution (in the part of the bifurcation diagram physically relevant) is found to be extremely robust.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have