Abstract
AbstractThe aim of the study was to examine how a reduction of Mn content in PM steels will affect their plastic and strength properties. The results of mechanical, metallographic and fractography tests of sintered (PM) steels containing 1% and 2% Mn are reported and compared with those for 3% Mn PM steel. Höganäs iron powder grade NC 100.24, low-carbon ferromanganese Elkem and graphite powder grade C-UF were used as the starting powders. Powder mixes Fe-(1-2)%Mn-0.8%C were prepared in a Turbula mixer for 30 minutes. Following mixing, “dog bone” compacts were single pressed at 660 MPa, according to PN-EN ISO 2740 standard. Sintering of compacts was carried out in a laboratory tube furnace at 1120°C and 1250°C for 60 minutes in a mixture of 95%N2– 5%H2in a semi-closed container. Three types of heat treatment were then used: sinterhardening (cooling rate – 66°C/min), slow furnace cooling (cooling rate 3.5°C/min) and tempering at 200°C. The studies have shown a beneficial effect of the reduction of manganese on plastic properties (up to 7.96%), while maintaining fracture strengths (UTSs) comparable to those of steel with higher contents of manganese. Currently detailed studies of steel containing 1%Mn are conducted.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
