Abstract
Fly ash is a waste material from coal-burning power plants that consume pulverized solid fuels. Two fly ashes from Asturias (Spain) were activated mechanically by wet milling and chemically by leaching with sulfuric acid. The activated fly ashes were characterized in terms of physico-chemical characterization, granulometry, density, blaine, BET, XRD and SEM. A comparative study was carried out of several mortars, in some cases using different additions of silica fume or activated fly ash. The influence that these additives have on the mechanical resistance of the mortars was studied. As well as the possible use of these activated fly ashes as a replacement for silica fume in producing high-strength mortar or concrete. It was found that mortars containing activated fly ash presented higher compressive strengths. A mercury intrusion porosimetry study was carried out on cement mortars made with mineral additives such as silica fume and activated fly ashes. In general, the porosities values of these mortars showed that mineral admixtures improved mechanical resistance due to the decrease in pore size.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
