Abstract
The effect of matrix microstructure on the stress-controlled fatigue behavior of a 2080 Al alloy reinforced with 30 pct SiC particles was investigated. A thermomechanical heat treatment (T8) produced a fine and homogeneous distribution of S′ precipitates, while a thermal heat treatment (T6) resulted in coarser and inhomogeneously distributed S′ precipitates. The cyclic and monotonic strength, as well as the cyclic stress-strain response, were found to be significantly affected by the microstructure of the matrix. Because of the finer and more-closely spaced precipitates, the composite given the T8 treatment exhibited higher yield strengths than the T6 materials. Despite its lower yield strength, the T6 matrix composite exhibited higher fatigue resistance than the T8 matrix composite. The cyclic deformation behavior of the composites is compared to monotonic deformation behavior and is explained in terms of microstructural instabilities that cause cyclic hardening or softening. The effect of precipitate spacing and size has a significant effect on fatigue behavior and is discussed. The interactive role of matrix strength and SiC reinforcement on stress within “rogue” inclusions was quantified using a finite-element analysis (FEA) unit-cell model.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
