Abstract
Lead zirconate titanate (PZT)-based piezoelectric ceramics with a composition of (Pb0.99−3x/2Lax)(Zr0.95Ti0.05)0.98Nb0.02O3, where x = 0.0, 0.004, 0.005, and 0.006 were prepared by a combined method of B-site precursor, whereby ZrO2, TiO2, Nb2O5, and La2O3 were pre-reacted, prior to reaction with PbO. Then the wet mechanically activated PZT calcinates prepared using a planetary ball mill were pressed into pellets and sintered at 1275 °C for 2 h in air. The effect of lanthanum substitution on the microstructure and dielectric constant and electromechanical coupling coefficient aging rate of the samples were studied. The results showed that lanthanum substitution was beneficial for reduction dielectric constant and electromechanical coupling coefficient aging rate of the samples and the samples with 0.4 mol% lanthanum exhibited the minimum e r and k p aging rates of −0.86 and −6.28%, respectively, less than that of La free samples(−1.49 and −11.19%, respectively).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
