The effect of homogenization and addition of polysaccharides on the viscoelastic properties of processed cheese sauce

Abstract

This study was conducted to determine the effect of 1-stage homogenization (OSH) and 2-stage homogenization (TSH) and the addition of polysaccharides [κ-carrageenan (CR) or furcellaran (FR) at levels ranging from 0.000 to 1.000% (wt/wt)] on the physicochemical, viscoelastic, and mechanical vibration damping properties of processed cheese sauces (PCS) after 30 d of storage (6 ± 2°C). The basic chemical properties (pH, dry matter content) were similar for all tested samples. Viscoelastic measurements indicated that PCS rigidity was directly proportional to increasing CR or FR concentration and to the application of homogenization. The interactions between the application of homogenization and the concentration of polysaccharides used were also significant. Compared with OSH, TSH did not lead to any further increase in the rigidity. The preceding results were also supported by data obtained from a nondestructive method of mechanical vibration damping. No changes in water activity were observed in any PCS sample. Overall, the addition of FR or CR appeared to be highly suitable for increasing the emulsion stability of PCS. If PCS products with softer consistency are desired, then a concentration of CR/FR ≤0.250% (wt/wt) could be recommended together with OSH/TSH. For products for which a firmer PCS consistency is required, the addition of CR in concentrations of ≥0.500% (wt/wt) or FR in concentrations of ≥1.000% (wt/wt) together with OSH is recommended. Finally, as the concentration of polysaccharides increased, a darker PCS color was observed.