Abstract
The authors have studied the effect of solid-state nanoparticle-based modification on the structure of zinc oxide powders. To carry out the experiment, seven types of nanoparticles of various oxides were applied. The modification was performed by heating the powder mixtures in the air at 650°C for 2 hours. The concentration of nanopowders was 10 wt.%, the average grain size of nanoparticles varied from 10 to 80 nm. It was established that high-temperature nanoparticle-based modification does not lead to significant structural changes and cannot affect the properties of zinc oxide powder. While modifying zinc oxide powders, an increase in photo- and radiation stability can occur primarily because of mechanisms associated with the deposition of nanoparticles on the surface of the micropowder. Due to structural changes, certain types of nanoparticles (e.g., alumina in the sample under investigation) can make a rather insignificant contribution to the stability of optical properties when exposed to radiation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.