Abstract
Starch/poly(vinyl alcohol) (PVA) films with the addition of 10 wt% CaCl2 and various content of glycerol were prepared. The effect of glycerol on the crystalline, thermal, and tensile properties of CaCl2‐doped starch/PVA films was studied by X‐ray diffraction, thermogravimetric analysis (TGA), and tensile testing, respectively. The effect of glycerol on the miscibility of CaCl2‐doped starch/PVA films was studied by scanning electron microscopy. The CaCl2‐doped starch/PVA film became more homogeneous after the addition of glycerol. The addition of glycerol would increase the crystallinity of CaCl2‐doped starch/PVA film. With the addition of 10 wt% glycerol and 10 wt% CaCl2, the starch/PVA film showed the highest degree of crystallinity. The TGA results show that the thermal stability of CaCl2‐doped starch/PVA film increased after the addition of glycerol. The toughness of CaCl2‐doped starch/PVA films was enhanced with the addition of glycerol. The starch/PVA film with the addition of 10 wt% CaCl2 and 20 wt% glycerol showed the tensile strength of 17 MPa and the elongation at break of 428%. Moreover, the water sorption of CaCl2‐doped starch/PVA film decreased after the addition of glycerol at the low and intermediate relative humidity of 33 and 54%. POLYM. COMPOS., 37:3191–3199, 2016. © 2015 Society of Plastics Engineers
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.