Abstract
Ba0.7Sr0.3TiO3 (BST) ceramics were prepared by the conventional solid state ceramic route. Different weight percentages of twelve different glasses were added to the calcined BST ceramics and sintered. The structure and microstructure of the sintered materials were investigated by X-ray diffraction and Scanning Electron Microscopic techniques. The low frequency dielectric properties of the glass-ceramic composites were measured using LCR meter. Some of the glasses improved the dielectric properties and considerably lowered the sintering temperature. The glasses were prepared and characterized under identical conditions. Among the different glasses, 1.5 wt% addition of 71ZnO–29B2O3 lowered the sintering temperature of BST to 975 °C with a dielectric loss of 9 × 10−3 and dielectric constant of 875 at 1 MHz. The curie temperature of BST ceramics was found to shift towards lower temperature with glass addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.