Abstract
In this modern era, the palm oil industry is growing, so the waste is also increasing. If the waste from the palm oil industry is not processed, it will pollute the environment. One way to process palm oil waste is to turn the empty palm fruit bunches (OPEFB) fibers into composite reinforcement. Various natural fibers can be applied to become composite reinforcement, so it is necessary to study the character of OPEFB fibers for composite reinforcement. This study will look at the effect of various volume fractions on the bending strength of the composite. The volume fraction consists of 20%, 30%, and 40% fiber. The composite is then tested for bending to determine the bending strength of the composite. The results of the tests showed that the highest bending strength value was the 30% volume fractional variation with 47.70 MPa. The 40% volume fraction variation has the lowest bending strength value of 29.53 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.