Abstract
Samples of RR1000 with differing grain size and surface finish have been exposed to air at different pressures. Specimens were exposed for 4000 h at 650°C with some exposed to atmospheric pressure air and some exposed to air at 40 bar pressure. Samples exposed to elevated pressure formed a surface layer of NiCr2O4 whereas that formed on samples tested at 1 bar pressure was chromia. The surface layer formed at 40 bar pressure was thinner than that a 1 bar pressure. At 1 bar pressure, some samples exhibited regions of convoluted buckled oxides but no spallation. In adjacent regions of planar oxides, spallation did occur. For the latter case, an estimate of 6 Jm−2 for the interfacial fracture energy has been made. None of the specimens tested at 40 bar pressure exhibited oxide spallation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.