Abstract
Abstract Acid mine drainage (AMD) production by sulfide mine tailing (SMT) is a major environmental preoccupation because it can degrade water surface quality on account of its strong acidity and advanced content of sulfide, iron (Fe) and other metals and metalloids. Acid neutralization and the precipitation of metals present in AMD were carried out by electro-activation with ion-exchange membranes, which is based on the self-generation of necessary conditions for acid neutralization and metal precipitation. The treatment of SMT was carried out by using an electro-activation cell generated alkaline solution in the cathode compartment. After 60 min of electro-activation, a pHcatholyte of 7.9–9.6, depending on the experimental conditions, was obtained. The absence of Fe and other trace metal ions in the catholyte provide evidence that the electro-activation of SMT promotes the precipitation of insoluble trace metals in the cathode compartment. This approach can be applied to real conditions in combination with a pretreatment of SMT neutralization, in which biological calcareous amendments are available. Finally, the electro-activation technology of acid mine drainage may be a feasible, cost-effective approach for SMT neutralization because it focuses on sustainable development.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
