The Effect of Dyeing and Mohair/Wool Blend Ratio on Fabric Physical Properties

Abstract

ABSTRACT In this study, dyeing effects on the physical properties of blended fabrics containing different ratios of wool and mohair fibers were investigated in detail. Six types of fabrics were produced by using 100% wool yarns and 100% mohair yarns separately in either direction with different sequences. Then the fabrics were dyed with a wool reactive dye and physical properties were investigated before and after dyeing process. As a result of the study, wool/mohair blended fabrics could be used in the lightweight suitings since adding mohair in the fabric composition made the fabrics stiffer, less drapeable, more air permeable. Another important finding was that the color yield values of both front and back sides of the 50/50% blended fabrics were found to be quite close. From this point of view, if wool and mohair yarns were used symmetrically in the fabric structure, it would be possible to dye blended fabric uniformly in one bath. Otherwise, in case of weaving fabrics according to various designs using wool and mohair yarns separately in either direction unsymmetrically, two different tones could be obtained on the same fabric, known as a bicolor effect.