The Effect of Different Separated File Retrieval Strategies on the Biomechanical Behavior of a Mandibular Molar: A Finite Element Analysis Study

Abstract

IntroductionThis study evaluated the effects of retrieval strategies of separated nickel-titanium files on the biomechanical behavior of endodontically treated teeth by finite element analysis. MethodsSix FE models were created: intact tooth; simulated a scenario where the apical 3 mm of a nickel-titanium file is separated and retained; TD, simulated application of a trephine drill to expose 1 mm of the separated file; simulated troughing of 180° at the inner wall of root canal for an extra 1 mm of the separated file beyond the staging platform; simulated circumferential ultrasonic troughing done for an extra 1 mm after the TD; and PM, simulated iatrogenic perforation sealed using MTA. Occlusal loading followed the occlusal fingerprint of the tooth before maximum von Mises stresses, maximum principal stresses, safety factor, and number of cycles till failure were determined. The cervical region of the teeth and mid-root sections including the separated file was chosen as the areas of interest for further analysis. ResultsIntact tooth recorded the highest number of cycles till failure and safety factor. Other models showed a narrow range of variation in all aspects with the PM recording the lowest number of cycles till failure. The highest von Mises stress was recorded at the mesiobuccal line angle of the PM near its cervical margin, while the lowest was found at the intact tooth. ConclusionUnder the limitation of this study, various file retrieval strategies removing the surrounding root dentin within the amounts of general guidelines do not affect the biomechanical behavior of the tooth.