The effect of composition on the dynamic and mechanical properties of natural rubber–poly(methylmethacrylate) blends

Abstract

AbstractThe miscibility of the components in natural rubber–poly(methylmethacrylate) blends for potential use as reinforced rubbers was evaluated using the glass transition temperatures, peak widths of the loss tangent peak at the glass transition and the complex heat capacity data obtained from dynamic mechanical thermal analysis (DMTA), and modulated differential scanning calorimetry (MDSC). In addition, the effect of the poly(methylmethacrylate) content on the dynamic mechanical and the physical properties such as tensile behavior and hysteresis loss was studied. DMTA and MDSC data clearly indicated that the blends were phase‐separated. Nevertheless, the glass transition temperature of the natural rubber component in the 30–50 wt % NR/PMMA blends has shifted to higher temperatures compared to the natural rubber treated under the same condition, indicating some limited extent of mixing of components in these blends. The physicomechanical properties including moduli at 100, 300, and 500% and tensile strength of the NR/PMMA blends were determined. Incorporation of PMMA into NR matrix improved the strength properties of the NR/PMMA blends prepared reasonably akin to interpenetrating polymer networks (IPN) polymerization method. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009