Abstract
Untreated corn stalk (CS), deionized water washed CS (WCS), aqueous phase bio-oil washed CS (LCS), and 5% acetic acid washed CS (CCS) were torrefied at 230, 260, and 290 °C. The influences of washing, torrefaction, and combined washing-torrefaction pretreatments on corn stalk pyrolysis were investigated. The combined pretreatments, especially aqueous phase bio-oil washing-torrefaction improved fuel properties of pretreated samples largely by increasing their volatile and hydrogen contents. Absorption peaks of O–H and CO groups in combined pretreatment samples increased when torrefaction temperature increased. In addition, CO, H2, and CH4 contents of pyrolysis gas increased, while CO2 decreased after combined pretreatments. The bio-oil yields from WCS290, LCS290, and CCS290 increased by 134.04%, 127.66%, and 129.79% respectively, compared with that from CS290. Similarly, their relative sugar contents (rich in levoglucosan) increased to 36.63%, 45.89%, and 52.34%, respectively. Aqueous phase oil washing-torrefaction is a promising pretreatment and acetic acid plays the most important role.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.