Abstract
The combination of recycled fiber reinforcement with recycled polymer as a feedstock material for extrusion-based additive manufacturing creates an opportunity for a more sustainable material use. In this study, recycled short carbon fibers were combined with recycled poly(ethylene terephthalate) (PET) to obtain carbon fiber-reinforced PET filaments via melt extrusion. The carbon fiber content of the extruded filaments ranged from 0.4 to 40.7 wt%. The molar mass and the degree of crystallinity after processing were determined to evaluate the influence of the extrusion process on the physico-chemical and mechanical properties of the reinforced PET filaments. Furthermore, pressure-volume-temperature measurements were carried out to investigate the influence of the carbon fibers on the shrinkage of the semi-crystalline PET. Samples were printed and their superior mechanical properties, including a 390 % increase in tensile modulus, were confirmed via tensile testing. Analysis via X-ray micro-computed tomography indicated that the fiber length reduced with increasing fiber content. The high degree of fiber alignment that was observed in the extruded filaments, was slightly reduced after deposition. Scanning electron microscopy data showed that fiber pull-out was the governing failure mechanism, indicating a weak interface between the carbon fibers and the matrix. The results show the potential of extrusion-based additive manufacturing to valorize recycled PET and recycled carbon fibers. • Extrusion of recycled carbon fiber/recycled poly(ethylene terephthalate) filaments • Characterization of filaments with carbon fiber content ranging from 0.4 to 40.7 wt% • Study of the influence of the extrusion process on the molar mass • Reduced shrinkage and increased tensile modulus of reinforced printed parts • Characterization of fiber length and orientation in filaments and printed parts
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
